 |
1.System can produce water continuously and high degree automation.
2.No need chemical to regenerate, easy operation and maintenance.
3.Core components of ro system are imported USA DOW membranes.
4.Automatic switch on when low water level, and switch off when high water level
5.System flushes RO membranes automatically, reducing membranes polluted speed.
6.Water shortage protection for multi-stage pump
7.Product water conductivity meter can monitor water quality online continuously.
8.Low operation cost and long life span
XRME210210134
XINDRAY
1.System can produce water continuously and high degree automation.
2.No need chemical to regenerate, easy operation and maintenance.
3.Core components of ro system are imported USA DOW membranes.
4.Automatic switch on when low water level, and switch off when high water level
5.System flushes RO membranes automatically, reducing membranes polluted speed.
6.Water shortage protection for multi-stage pump
7.Product water conductivity meter can monitor water quality online continuously.
8.Low operation cost and long life span
Technical Specification:
| Equipment main techniques | Pre-treatment + Double stage RO (directly connected) + Circulated pipes to all wards |
Soluble salt removal rate | 99.50% |
Water flow (25℃ water temperature) | 1200L/H |
Total power | 8KW |
Installation site required | ≥15㎡ |
Host size(W*L*H) | 900*1850*1650 |
Overall height | 2.6T |
Equipment operating pressure | 0.8~1.2Mpa |
Ratio of recycle | 50~75% |
Disinfection | Peracetic acid as chemical disinfection and heat disinfection as option |
Power supply | AC 380V±10% three-phase-five-wire system frequency 50~60HZ |
Water inlet | City tap water meets standard of GB5749, temperature 5~40 degrees |
Drainage and ground | Floor with drainage site and waterproof treated floor |
Indoor environment of installation | Indoor air humidity≤80% |
1.System can produce water continuously and high degree automation.
2.No need chemical to regenerate, easy operation and maintenance.
3.Core components of ro system are imported USA DOW membranes.
4.Automatic switch on when low water level, and switch off when high water level
5.System flushes RO membranes automatically, reducing membranes polluted speed.
6.Water shortage protection for multi-stage pump
7.Product water conductivity meter can monitor water quality online continuously.
8.Low operation cost and long life span
Technical Specification:
| Equipment main techniques | Pre-treatment + Double stage RO (directly connected) + Circulated pipes to all wards |
Soluble salt removal rate | 99.50% |
Water flow (25℃ water temperature) | 1200L/H |
Total power | 8KW |
Installation site required | ≥15㎡ |
Host size(W*L*H) | 900*1850*1650 |
Overall height | 2.6T |
Equipment operating pressure | 0.8~1.2Mpa |
Ratio of recycle | 50~75% |
Disinfection | Peracetic acid as chemical disinfection and heat disinfection as option |
Power supply | AC 380V±10% three-phase-five-wire system frequency 50~60HZ |
Water inlet | City tap water meets standard of GB5749, temperature 5~40 degrees |
Drainage and ground | Floor with drainage site and waterproof treated floor |
Indoor environment of installation | Indoor air humidity≤80% |
